SGT-3000 Full Automatic Dual-line Tabber&Stringer
Product advantage
1.CCD visual defect detection and positioning
2.High-speed four axis mechanical hand solar cell classification handling and positioning
3.Accurate and quantitative spraying of flux
4.Original flexible ribbon pressing mechanism
5.Infrared heating, subsection soldering, closed loop control of soldering temperature and power, temperature raise smoothly and small heat shock, effectively reduce the solar cell breakage rate.
6.The battery string detection system can be used to detect the dislocation of the main grid and the position of bus bar (optional).
Technical Parameters
Model specification |
SGT-3000 |
Size of solar cell |
156×156,156.75x156.75,156×78mm |
Thickness of solar cell |
0.16-0.3mm |
Quantity of bus-bar |
3BB, 4 BB, 5BB, 6BB (fixture switching, customized according to customer requirements) |
Coincidence degree deviation of ribbon and bus bar |
≤±0.1mm |
Maximum length of string soldering |
2000mm |
ribbon specification |
Thickness0.15-0.3,Width0.7-2mm (customized according to customer requirements) |
Flux adding method |
Spray |
Soldering method |
IR heating |
Breakage rate |
≤1‰(positive A class) |
Maximum capacity |
Half piece2600pcs/hr,Whole piece 2400 pcs/hr |
Power consumption |
28KW |
Voltage input |
AC380V(3 phase 5 wires),50-60Hz |
Input compressed air pressure |
0.6-0.8MPa |
Input compressed air flow |
450L/min |
Size |
6000×1450×2100mm |
Net weight |
3500kg |